NKM/NKE/NKTM/NKTE
                          Nylon Insert
                                                 Cap Locknut

MATERIAL:

Nut - Steel, Stainless Steel and Brass with a Nylon Cap.

​

FINISH:

As required.

​

LOCKING INSERT:     

Nylon (250°F max performance). White, Black or Gray.

Sealing - 80 psi (See Application Note).

​

APPLICATIONS:

Type NKM, NKE, NKTM and NKTE Cap Nuts are designed for use in place of Standard and Thin Height hex nuts

in applications where for reasons of safety or appearance, it is desirable to cover exposed bolt ends. They are

also suitable for sealing internal or external pressures, up to 80 PSI past the bolt threads. Provided a proper seal

is effected between the nut seat and its mating surface.

NOTES:

1. The locking insert and cap are an integral part.

2. "H2" maximum designates the maximum recommended bolt entry to avoid contact with the top of the cap.

     "H1" minimum designates the minimum recommended bolt entry to insure satisfactory locking performance.

​